MMC Test Kit - How to Use

Knock the unopened ampoule several times
against a hard surface, so the granules which
may be sticking to the inside of the ampoule wall
will fall downwards.

Take the top of the ampoule between
the thumb and index finger and
snap off the topwith the ampoule breaker

Use the spatula to insert the suspect
material into the ampoule (1) or
into the plastic cap (2)

For suspect samples in liquid form such as GHB,


we advise to use the round end of the supplied
spatula or otherwise use a pipette and insert
one drop into the ampoule.

With the MMC LSD / Cannabis / V&R and
Ketamine Test, the plastic lid contains a
|catalyst grain which, once the material to
be tested is inserted in the ampoule,
must be mixed using the round tip of the
spatula.

Attention! If the ball in the cap sticks against the
side, please use a spatula to take it out and, put it in
the ampoule and mix it.
Place the plastic cap on top of the ampoule.

Compare the color from the reagent granulate
with the color line printed on the ampoule.

Since the MMC Tests does not require acid
neutralizers (as this is automatically
done within the ampoule) you may throw the used
ampoules in the trash or glass bin.