AutoLock Polycarbonate Holders

Monadnock AutoLock Polycarbonate Holders

For the AutoLock batons we've designed our Front Draw Holder with Clip-On backs to work specifically with this design. Made from durable polycarbonate, all holders feature a molded tension spring for baton security. The design is comfortable to wear and offers a quick draw from any position.

18" (45.72 cm), 22" (60.96 cm) and 26" (66.04 cm) baton holders have the horizontal cut bottom to be able to receive the Power Safety Tip style baton.

Remember: You need the appropriate holder for the style of AutoLock used. This is to facilitate the ability of the officer to put the baton in the holder while in the locked open position.

• The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
• For Clip-ons only: The pad is used to put on the inside back of the clip on back to maintain the holder from moving on the duty belt
• If using the 2 ¼" (5.715 cm) belt, the pad may or may not be necessary depending on the thickness of the belt. You might place undue stress on the holder. Note: You may use ½ the pad for off duty belts
• Accommodates either the Foam grip or Super Grip
• You can take the holder off the belt without stripping the whole belt

Note:when using a baton with the Super Grip slightly twist the Super Grip when drawing from the holder and slightly twist it when returning it to the holder for easier functionality. The Super Grip is very tactically retentive so it grabs the holder for excellent baton retention.

Features:

• The holder rotates in 360 degrees and locks in one of 8 locking positions
• To order a Front Draw Holder that only goes 45 degrees forward and backward add a /L after the item number
• This 45 degree option is appropriate for an officer is using the 26" (66.04 cm) baton with the Hindi Baton-Cap installed on it
• Also an option for anyone concerned about their baton rotating too far in the holder
• The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
• Offered in clip-on or slide-on style
• 21" (53.35 cm) baton holder has the half moon bottom for Safety Tip style baton
• Made in the USA

Finish Styles:

• Plain, Basket Weave

Available Options: MON-3030 AutoLock 21 Front Draw 360° Swivel Holder, Clip-On Type: 360 Degree swivel Attachment: Clip On Finish: Plain MON-3030L AutoLock 21, 45° Only Swivel Holder Type: 45 Degree swivel Attachment: Clip On Finish: Plain MON-3042 AutoLock 18 Front Draw 360° Swivel Holder, Clip-On Type: 360 Degree swivel Attachment: Clip On Finish: Plain MON-3042L AutoLock 18, 45° Only Swivel Holder Type: 45 Degree swivel Attachment: Clip On Finish: Plain MON-3630 AutoLock 21 Front Draw Basket Weave 360° Swivel Holder, Clip-On Type: 360 Degree swivel Attachment: Clip On Finish: Basket Weave MON-3642 AutoLock 8 Front Draw Basket Weave 360° Swivel Holder, Clip-On Type: 360 Degree swivel Attachment: Clip On Finish: Basket Weave MON-3080 AutoLock 21 HG Baton Front Draw 360° Swivel Holder, Clip-On Type: 360 Degree swivel Attachment: Clip On Finish: Plain MON-3084 AutoLock 22 Front Draw HG Baton 360° Swivel Holder, Clip-On Type: 360 Degree swivel Attachment: Clip On Finish: Plain MON-3034 AutoLock 22 and 26 Front Draw 360° Swivel Holder, Clip-On Type: 360 Degree swivel Attachment: Clip On Finish: Plain MON-3034L AutoLock 22 and 26, 45° Only Swivel Holder Type: 45 Degree swivel Attachment: Clip On Finish: Plain MON-3634 AutoLock 22 and 26 Front Draw Basket 360° Swivel Holder, Clip-On Type: 360 Degree swivel Attachment: Clip On Finish: Basket Weave

Typical Specifications:

• Type: 360, 45 Degree
• Length: 2.65 inches (6.73 cm)
• Front Wall Thickness: 0.143 inches (0.36 cm)
• Front Outside Diameter: 1.75 inches (4.44 cm)
• Front Internal Diameter: 1.35 inches (3.35 cm)
• Back Height: 3.00 inches (7.62 cm)
• Back Width: 1.50 inches (3.81 cm)
• Back Depth: 0.95 inches (2.41 cm)