Front Draw Holders for MX / SX / Detective / Mariner Batons

Monadnock MX and SX and Friction Lock - Detective - Mariner Expandable Baton Holders

For the AutoLock batons we’ve designed our Front Draw Holder with Clip-On backs to work specifically with this design. Made from durable polycarbonate, all holders feature a molded tension spring for baton security. The design is comfortable to wear and offers a quick draw from any position.

Features:

• The holder rotates in 360 degrees and locks in one of 8 locking positions
• To order a Front Draw Holder that only goes 45 degrees forward and backward add a /L after the item number
• This 45 degree option is appropriate for an officer is using the 26" (66.04 cm) baton with the Hindi Baton-Cap installed on it
• Also an option for anyone concerned about their baton rotating too far in the holder
• The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
• Offered in clip-on or slide-on style
• 21" (53.35 cm) baton holder has the half moon bottom for Safety Tip style baton
• Made in the USA

18" (45.72 cm), 22" (60.96 cm) and 26" (66.04 cm) baton holders have the horizontal cut bottom to be able to receive the Power Safety Tip™ style baton.

Remember: You need the appropriate holder for the style of AutoLock used. This is to facilitate the ability of the officer to put the baton in the holder while in the locked open position.

• The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
• For Clip-ons only: The pad is used to put on the inside back of the clip on back to maintain the holder from moving on the duty belt
• If using the 2 ¼" (5.715 cm) belt, the pad may or may not be necessary depending on the thickness of the belt. You might place undue stress on the holder. Note: You may use ½ the pad for off duty belts
• Accommodates either the Foam grip or Super Grip
• Note: when using a baton with the Super Grip slightly twist the Super Grip when drawing from the holder and slightly twist it when returning it to the holder for easier functionality. The Super Grip is very tactically retentive so it grabs the holder for excellent baton retention

Finish:

• Plain, Basketweave

Available Options:

• 3025: Detective/Mariner/Officer-16 and 21 Front Draw 360 Swivel Clip On
  • Type: 360
  • Belt Attachment: Clip On
  • Finish: Plain
    
    
• 3625: Detective/Mariner/Officer-16 and 21 Basketweave Front Draw Clip On
  • Type: 360
  • Belt Attachment: Clip On
  • Finish: Basket
    
    
• 3006: MX Front Draw Holder
  • Type: 360, 45
  • Overall Length: 4.50 inches (11.43 cm)
  • Front Wall Thickness: 0.15 inches (0.38 cm)
  • Front Outside Diameter: 1.35 inches (3.43 cm)
  • Front Internal Diameter: 1.03 inches (2.62 cm)
  • Back Height: 3.00 inches (7.62 cm)
  • Back Width: 1.50 inches (3.81 cm)
  • Back Depth: 0.95 inches (2.41 cm)
  • Belt Attachment: Clip On
  • Finish: Textured
  • Color: Black
    
    
• 3606: MX Basketweave Front Draw 360 Swivel Holder, Clip On
  • Type: 360 Degree
  • Belt Attachment: Clip On
  • Finish: Basket
    
    
• 3027: Detective/Mariner/Officer-24 and 26 Front Draw 360 Swivel Holder Clip On
  • Type: 360 Degree
  • Belt Attachment: Clip On
  • Finish: Plain
    
    
• 3627: Detective/Mariner/Officer-21 and 26 BW Front Draw 360 Swivel Holder
  • Type: 360 Degree
  • Belt Attachment: Clip On
  • Finish: Basket
    
    
• 3011: SX-24 Front Draw 360 Swivel Holder with Special Grommet
  • Type: 360, 45
  • Overall Length: 2.63 inches (6.68 cm)
  • Front Wall Thickness: 0.143 inches (0.36 cm)
  • Front Outside Diameter: 1.625 inches (4.13 cm)
  • Front Internal Diameter: 1.35 inches (3.35 cm)
  • Back Height: 3.00 inches (7.62 cm)
  • Back Width: 1.50 inches (3.81 cm)
  • Back Depth: 0.95 inches (2.41 cm)
  • Belt Attachment: Clip On
  • Finish: Plain
  • Color: Black
  3025X, MON3025X, MON3025, MON3625, MON3006, MON3606, MON3027, MON3627, MON3011