PreScan PS30 for "Live Scan" fingerprinting

PS30

PreScan PS30 for "Live Scan" fingerprinting, this pad puts the perfect amount of solution on the skin to make the best contact between the finger and the scanner.

With "Live Scan" fingerprinting units, the resulting fingerprints may not be perfect. This is because the skin of the finger is not making good contact with the scanner glass. The solution to this problem is the Identicator Pre-Scan pad. This pad puts the perfect amount of solution on the skin to make the best contact between the finger and the scanner. Roll the finger on the Pre-Scan Pad first (no colored residue is visible on the finger), and then roll the finger on the scanner for dramatically improved results. There is no need to guess how much chemical to put on the fingers. With this pad, there is always the right amount.

The pad is 3" x 4 1/2" and is good for about 16,000 impressions.

How to use PreScan PS30

1. Simultaneously press all four fingers of the left hand to the pad surface.

2. Repeat step 1 for the right hand.

3. Separate all fingers slightly and rub the finger tips back and forth against the opposite hand, evenly distributing the Pre-Scan solution to all areas of the finger tips.

4. Roll each thumb individually to the pad.

5. Start rolling to the live-scan system.